Electronics > Electronics Accessories > Computer Components > Storage Devices > Hard Drive Accessories > Hard Drive Enclosures & Mounts > Hard Drive Enclosures
You can directly transfer your original RAID Group disks into this enclosure, and the system will be immediately ready for use. No RAID re-creation or additional software configuration is required, significantly reducing data migration costs and risks. SATA III is currently the most widely adopted SATA interface standard. It has a theoretical maximum transfer speed of 6 Gbps (approximately 600 MB/s). Actual sustained read/write speeds depend on the drive type.* SATA SSDs: Can reach 500–560 MB/s* 3.5" HDDs: Typically deliver 240–285 MB/s (mainstream models usually range from 180–260 MB/s) This enclosure features a USB-C 3.2 Gen 2x2 20 Gbps upstream port, which removes the interface bottleneck and allows every drive to operate at its full potential. In RAID 5 mode with multiple 2.5" SATA SSDs, the enclosure can achieve real-world aggregated speeds of 1300–1600 MB/s, fully utilizing the 20 Gbps bandwidth for high-performance storage arrays. Safety Lock DesignSATA III 6Gbps High speed20Gbps speeds in RAID 5 mode6 RAID Array Modes10min Auto-SleepSingle Disk up to 30TBBuilt-in High Speed FanSupport 2.5/3.5 inch SATA HDD/SSD This enclosure requires RAID 5 mode to achieve speeds of 20Gbps. It supports RAID 0, RAID 1, RAID 10, JBOD, RAID 5, and PM modes. You can adjust the RAID mode according to your needs.
